Terminal requirements:
- RS232 DB9 serial port ( 9 pins)
- RTCM 3.0-3.* Format
- baud rate: 115200, 57600 und 38400 bps
- NMEA0183 messages: GGA, GST, RMC, VTG, ZDA. !The GSA message has been planned to be added in Q2 2022!
- FieldBee transfers data with a 10Hz update rate.
How to check if my tractor is compatible with an autosteer?
Our company has 2 types of autosteer kits. They are suits for different types of vehicles, even old one.
Fill in the form to get direct information about the most suitable autosteer kit for your machinery.
Which tablet is better to use?
FieldBee navigation software is working only in Android devices. If you are choosing new Android tablet or smartphone here are the requirements that can help to improve your experience with FieldBee system:
Minimum- Android: 5.1.1: Lollipop;
- Processor: Qualcomm Snapdragon 632 MediaTek Helio P22
- RAM: 4GB
- 3G (WCDMA/UMTS/HSPA); 4G (LTE)
- Connectivity/Radios: WiFi or 3G/LTE, Bluetooth.
- Android: 7.1: Nougat;
- Processor: Qualcomm Snapdragon 845 MediaTek Helio X30
- RAM: 8GB
- 3G (WCDMA/UMTS/HSPA); 4G (LTE)
- Connectivity/Radios: WiFi or 3G/LTE, Bluetooth.
The system updates every few seconds. What should I do?
There is a possibility to change GPS frequency in the FieldBee navigation app settings. So it can be faster updated and displayed your position.
You can edit the update rate to 5 and 10 Hz in settings (GPS frequency). It will help you work processing in future.
I don’t have internet in the field, will it work?
You can receive correction from the RTK Base station in two modes:
- via the Internet or
- via radio.
You can work in radio mode without the internet. In this case, the radius of the RTK signal is 2+ km and the RTK Base station needs to be in the line of sight of the tractor.
Is the data I saved during the trial period available after buying a subscription?
Yes, you can access the data you saved during the FieldBee trial period after buying the Premium subscription for the app.
How can I update the app to the latest version?
To update FiledBee app to the latest version, please, go to Play market, open FieldBee app and press “Update” button.
Is it possible to receive both raw measurements and RTK corrected coordinates?
Raw data is saved to the log files on the device, these are NMEA messages with corrected coordinates.
How to set up your FieldBee?
Here you can find the latest guides on how to set up your FieldBee.
As well you can get some tips here.
Is there NTRIP provider in my country?
Here you can find the list of NTRIP providers.
If you didn’t find your NTRIP provider in the list try to find it yourself.
ISOBUS functionality is planned for release in 2025.
FieldBee Steering Controller is resistant to heat interference.
Yes, all main components PowerWheel, Steering Controller and Tablet are powered by the tractor battery.
1-10 km/h with good performance ± 2,5 cm; maximum 15 km/h but accuracy can be lower ± 5 cm.
Tablet with FieldBee Navigation App works like a terminal. Main functionality:
- Set up the connection to the WiFi and RTK signal
- Create fields, lines, tasks (operations)
- Work with navigation lines: record, save, move, use the same line for other operations.
- Save information about the field operation: field, machine, crop, amount of material used, covered area etc.
Yes, tilt compensation algorithms uses the 3-axes (pitch/roll/yaw) to correctly adjust the latitude/longitude position.
There are 2 ways to assure RTK signal quality. First is connection to the FieldBee Base Station and the second one is NTRIP network option. Radio mode is supported.
Yes the system is required to be mounted on the hood in facing forward.
PowerSteer can be installed on almost all tractor models with front wheel steering 2wd and 4wd.
The system doesn’t produce any sound. In fact farmers are surprised how quiet it is.
Antenna became steering controller and now has built-in tilt compensation sensor. Easy to install and set up connection to the internet and RTK signal. The autosteer system now has fewer components and is easier to install.
We recommend mounting the Steering Controller on the hood for better accuracy.
This functionality is not available at the moment..
